If you want the windows in your home to look sparkling clean, you have to clean them with a squeegee. A squeegee is used after the scrubbing stage of window cleaning for removing cleaning solution and water. It is the best tool for this task because it does not leave any blot spots or marks on your windows, the way a towel does. However, a squeegee can only be truly effective if you know how to use it properly. Here are some valuable tips that can help you use a squeegee proficiently.
Before you start using a squeegee to clean your windows, you have to try to get a good feel for the tool. If you are unable to control your squeegee well, it is likely that you will have streaks on your windows after cleaning. Streaks can form when you apply too little or too much pressure on the squeegee, or move it too fast or too slow while cleaning. The amount of pressure you apply is dependent on the angle at which you are facing the window as well as the speed of the squeegee. You have to keep adjusting your position and speed until you get the right feel. You can do this by practicing using a squeegee on a smaller window in your home. Keep scrubbing and using the squeegee, and pay attention to the effects of each adjustment you make. Soon, you will know what it takes to make the squeegee work effectively.
The next thing you need to do is check the squeegee channel. Make sure that the channel is perfectly straight and there is no excessive ware on the squeegee rubber. If you are uncertain whether the condition of the rubber is good enough, you should just use a new rubber. Also, you need to have two dry cleaning towels, one for wiping the squeegee and the other for cleaning the edges of the window.
Wet the entire window with soapy water first. To make sure that you do not leave streaks on your window, you have to move the squeegee horizontally, from one side edge to another. If you are right-handed, it is recommended that you begin at the right side of the window. Wrap one of your cleaning towels around your index finger, and wipe the entire right edge and top edge of the window until they are completely dry. This will prevent water from dripping down after you squeegee the window. Next, place your squeegee’s rubber blade on the top right corner of the window, and pull it across to the other side, maintaining an angle of 15 to 20 degrees. Use a cleaning towel to wipe water off the squeegee blade, and check to make sure that the top and right edges of the window are still dry. Then, you can proceed to the next level below, and repeat the same process until you reach the bottom of the window.
After you have squeegeed the entire window, use a towel to wipe the edges. This will make your window look crisp and perfectly clean. If you find that you have missed dime-sized wet spots on your window, it is best that you start squeegeeing all over again, because simply wiping wet spots with a towel will leave marks on your window.
Using a Squeegee to Clean Windows Related Video:
The purchaser fulfillment is our primary focus on. We uphold a consistent level of professionalism, high quality, credibility and service for Handle For Squeegees , Pv Screen Printing Squeegee , Screen Printing Handle Squeegees , You can let us know your idea to develop unique design for your own model to prevent too much similar parts in the market! We will provide our best service to satisfy all your needs! You should contact us right away!