OEM Factory for Squeegee For Screen Printing Ink - Carbon Squeegee For Solar – PLET

Short Description:


Product Detail

Product Tags

Related Video

Feedback (2)

It is actually our accountability to satisfy your needs and effectively serve you. Your pleasure is our best reward. We're on the lookout forward for your stop by for joint growth for Silk Screen Printing Squeegee , Screen Printing Squeegee Roll , Textile Water Based Rubber Squeegee , We promise to try our greatest to deliver you with high quality and economical products and services.
OEM Factory for Squeegee For Screen Printing Ink - Carbon Squeegee For Solar – PLET Detail:

Development of photovoltaic squeegee:Just ten years, the gate line requirements more and more fine, has been from the initial 60um into the current 18um; followed by the squeegee replacement (as shown below), now SPS-AS-SL is more and more popular!

 SPS-AS-SL-Carbon Squeegee For Sola4

1.SPS-AS-SL’s core strengths are:

1.1 Electrostatic Dissipation Benefits

During the printing process, squeegee, screen, ink,silicon wafer friction static electricity is easily generated and static electricity accumulates to a certain voltage difference.Can cause silver particles, small particles, flying ink, etc.

 SPS-AS-SL-Carbon Squeegee For Sola5

1.2 Advantages of cutting type squeegee

The blade is smoother, and the ink on the screen is cleanerSharper edges for finer lines

SPS-AS-SL-Carbon Squeegee For Sola6

1.3 After testing, the support plate squeegee saves 8% of the silver paste compared to the traditional squeegee!The traditional squeegee printing process is easily deformed, the stable printing pressure and the printing angle cannot be maintained, and silver wire breaks easily.The operator must increase the printing pressure and reduce the printing angle to reduce the breakage, which will increase the ink consumption.

 SPS-AS-SL-Carbon Squeegee For Sola7

1.4 High print times

The surface roughness of the bottom of the squeegee is low and the surface area is small, reducing the area of the contact solvent ,solvent corrosion squeegee speed is reduced.Squeegee is not easy expansion and wear.Japan’s latest polyurethane formula, more solvent-resistant, more wear-resistant.

 SPS-AS-SL-Carbon Squeegee For Sola8

1.5 Unilateral design

Less solvent etched area

Smaller deformation area

Maintain stable printing pressure and angle for a long time

 SPS-AS-SL-Carbon Squeegee For Sola9

2.Size and hardness

2.1 Size

 SPS-AS-SL-Carbon Squeegee For Sola10

Code

L

a

b

f

c

d

R

Size(mm)

180

7.2

50

1.6

15

20

2.5

Tolerance(mm)

±1

±0.3

±0.5

±0.2

±0.2

±0.5

±0.5

2.2 Hardness

Different hardness corresponds to different colors

Polyurethane squeegee type AS

MADE IN JAPAN

Yellow—62±3

Hardness Tester

TYPE-A

GS-719N

Rose red—72±3

3.1 Material

3.2 Polyurethane rubber

Polyurethane rubber made in Japan

3.1.1 Physical properties

Project

Unit

Squeegee type AS

colour

Cyan 62A

Green 72A

hardness

JIS-A

62±3

72±3

100% stretchability

MPa

2.52

2.81

200% stretchability

MPa

 3.72

4.20

300% stretchability

MPa

6.50

5.65

Maximum stretching

MPa

35.1

22.1

Tensile limit

%

632

532

Breaking strength

KN/m

45.4

58.8

3.1.2 Chemical solvent resistance

Test time: 7 Days

Test solvent: xylene, methyl ethyl ketone

Test items: hardness change, quality change

SPS-AS-SL-Carbon Squeegee For Sola11

3.2 Carbon

The high quality carbon has uniform thickness, good elasticity and chemical resistance,conductivity.

4.Production process

The entire process from receiving an order to shipping

 SPS-AS-SL-Carbon Squeegee For Sola12

5.Packaging, storage

5.1 packaging

Paper package

20Pcs/Box

 SPS-AS-SL-Carbon Squeegee For Sola13

5.2 storage

①Store indoors at 40℃ or lower, do not store in high temperature and high humidity, direct sunlight and ultraviolet radiation. (Recommended storage conditions: 23℃±2℃, humidity 60% or lower)

②Do not store near heat-generating equipment or dusty places.

③It is forbidden to bend and press, stack it straight, stack no more than 20PCS.

④The scraping rubber is stored at a low temperature for a long time, and can not be used immediately after being moved to the workshop. It should be placed at 25℃for more than 3 hours before use.

15
23255436
company2222
84615


Product detail pictures:

OEM Factory for Squeegee For Screen Printing Ink -
 Carbon Squeegee For Solar – PLET detail pictures

OEM Factory for Squeegee For Screen Printing Ink -
 Carbon Squeegee For Solar – PLET detail pictures

OEM Factory for Squeegee For Screen Printing Ink -
 Carbon Squeegee For Solar – PLET detail pictures


Related Product Guide:
A New Technology Improves PV Module Efficiency | Printing Squeegees For Solar Panel
Best Screen Protectors for Samsung Galaxy S9 | Silk Screen Squeegee Rubber

High quality Initial,and Buyer Supreme is our guideline to offer the ideal assistance to our shoppers.At present, we are striving our best to become amongst the ideal exporters inside our industry to satisfy shoppers more want for OEM Factory for Squeegee For Screen Printing Ink - Carbon Squeegee For Solar – PLET, The product will supply to all over the world, such as: The Swiss , Korea , Vancouver , In order to meet more market demands and long-term development, a 150, 000-square-meter new factory is under construction, which will be put into use in 2014. Then, we shall own a large capacity of producing. Of course, we will continue improving the service system to meet the requirements of customers, bringing health, happiness and beauty to everyone.
  • The company comply with the contract strict, a very reputable manufacturers, worthy a long-term cooperation.
    5 Stars By Sharon from belarus - 2015.09.21 11:01
    The customer service staff's answer is very meticulous, the most important is that the product quality is very good, and packaged carefully, shipped quickly!
    5 Stars By David from New Zealand - 2015.09.19 18:37

    Related Products

    WhatsApp Online Chat !