FAQs

FAQS

Yuav ua li cas yog lub ntsiab hom SPS squeegee?

SPS squeegee yog txwv kom muab zais rau hauv peb loj pawg: 1. Tshuaj M-hom squeegee (tsis muaj kev txhawb nqa phaj). 2, FGB fiberglass scraping. 3, AS unilateral carbon fiber scraping cov pos hniav.

Muaj ntau ntau cov qauv ntawm cov roj hmab yog ib feem ntawm lub SPS squeegee?

Muaj uas tam sim no ob tug qauv, ib tug yog lub M-hom roj hmab siv nyob rau hauv lub M-hom thiab FGB fiberglass panels, thiab lwm yam yog lwm PLUS roj hmab siv nyob rau hauv lub AS-carbon fiber (conductive, ntau kuab-resistant, thiab ntau wear- resistant).

Yuav ua li cas yog qhov luaj li cas specifications ntawm lub M hom scraping lo?

M qauv muaj 9 * 50, 9 * 30, 7 * 40, 5 * 25, 5 * 20 ntsis thickness raws li thickness, thiab yog Mekas raws li cov neeg uas yuav tsum tau.

Yuav ua li cas yog cov qhov ntev ntawm FGB fiberglass scraper?

Cov tshuaj screen printing kev lag luam FGB fiberglass scraping specifications ntawm 9 * 50, qhov ntev ntawm tej raws li cov neeg uas yuav tsum tau. Yuav Mekas raws li cov neeg uas yuav tsum tau.

Yuav ua li cas yog cov qhov ntev ntawm AS carbon fiber squeegee?

Cov tshuaj screen printing kev lag luam AS carbon fiber scraping specifications 7 * 50, ntev raws li rau cov neeg uas yuav tsum tau. Yuav Mekas raws li cov neeg uas yuav tsum tau.

Yuav ua li cas yog cov ntaub ntawv hom thiab customization lub sij hawm yuav tsum tau rau kev cai cov kev pab cuam?

3D: STP, XT; CAD: 2000 version, kev cai lub sij hawm: tsis pub dhau 5 hnub ua hauj lwm

Is it possible to grind the SPS squeegee?

Lub peb hom scraper yuav av. M qauv thiab FGB qauv ib siab tshaj plaws sib tsoo nqi 0.5mm (200 mesh sib tsoo log). AS carbon fiber scraping ib siab tshaj plaws sib tsoo nqi 0.1mm (200 mesh sib tsoo log, carbon fiber board kuj yuav av). Lub squeegee uas tau cia li tau siv li muaj ib tug ntau ntawm cov kuab hauv. Lub hardness ntawm lub riam ntug yog heev tsawg yuav tsum tau av sai li sai tau. Nws yuav siv sij hawm xwb 24 teev ua ntej kev sib tsoo.

Yuav ua li cas rau nruab FGB fiberglass scraper thiab AS carbon fiber scraper rau hauv cov pa fixtures?

Ob lub FGB fiberglass scraper thiab lub AS carbon fiber scraper yog 1.2mm tuab. Lawv yuav tsum tau ntsia nrog ib tug 8mm tuab ncoo, uas peb muaj peev xwm muab kev pab.

Txij nkawm ntawm SPS Squeegee?

The squeegee is printed for a long time, and the solvent easily erodes the squeegee blade. The hardness and wear resistance of the squeegee are reduced. Therefore, after the squeegee has been printed for a long time, it needs to be cleaned, and after being left for 12-24 hours, it is used or ground again. If stored in a low-temperature environment, soak it in 30°C warm water for 10 minutes before use. Dry it with a cloth and use it. When the squeegee is left for a long time, it is forbidden to touch the other side of the squeegee to prevent the squeegee from deforming.