Sietspiede Square SQUEEGEE - Ķīna Changzhou Plet Drukāšana

Screen Printing Square Squeegee

Īss apraksts:


Product Detail

Preces birkas

Sietspiedes-Square-SQUEEGEE izmēra - OK

Screen Printing Square rakeli

SPS-ML-SL tiek izmantots vadošām alumīnija pastas drukāšanai uz muguras plāksnes fotoelementu šūnu, kas ir izturīgs pret drukāšanas laikiem, grūti deformēties un zemu cenu. Cietība izceļas ar dažādās krāsās

piemērots arī par mikroelektroniskajā screen printing

Industry Application

15

Workshop

23255436

Company Profile

Plet kompānija atrodas Changzhou, Ķīna, kas ir ļoti tuvu Shanghai. Viņš reiz pārdeva ekrāna drukāšanas tintes un pasniedz daudzās elektronikas nozarēs. Viņam ir plaša ekrāna drukāšanas pieredzi un sapratuši, cik svarīgi rakeli ekrāna drukāšanas procesā. 2013. Plet sāka nodarboties ar pētniecību un ražošanas atbalsta plate gumijas rullī un izveidota SPS zīmolu rakeli, kas nodrošina stabilu drukāšanas leņķi un drukāšanas spiedienu daudzu precizitāte sietspiedi klientiem Ķīnā.

company2222

Why choose us?

84615

Our Service

shouhou

Customer Praise

A. Photovoltaic Company Production Manager India:We are a company that prints battery sheet, SPS-AS carbon fiber squeegee printing Battery sheet grid is relatively small, printing life is long, each average reaches 50,000 times.

B. PCB circuit board company Technical staff China: Before we cooperate with SPS Squeegee, when we do the through hole printing process, the silver paste is not easy to penetrate the hole, and the scrap rate is very high. After talking with SPS technology, they recommended the new squeegee, which helped us solve the problem of low yield rate of through-hole printing. Thank you very much.

C. Membrane switch company quality management personnel Vietnam: SPS recommended R angle scraper printing transparent color effect is excellent, no squeegee marks, the surface looks very smooth, we will also apply R angle squeegee  to the window printing liquid printing process, hope to reduce the rate of defective rate.

 D. Technical Director of Chip Manufacturing Company Taiwan: We print insulating ink on special film, and 160 products are printed on A4 size film. This has high consistency on film thickness. The film thickness made by traditional squeegee,the film thickness in the middle and the film thickness of the edge product differ by 3 microns, and the carbon fiber squeegee using SPS solves this problem, and the film thickness of the entire printing surface is controlled by 13±1 μm.






  • Iepriekšējais:
  • Nākamais:

  • Uzrakstiet savu ziņu šeit un nosūtiet to mums