FAQs

FAQS

ndi mitundu ikuluikulu ya SPS squeegee chiyani?

SPS squeegee zimagawidwa m'magulu atatu aakulu: 1. Traditional M-mtundu squeegee (popanda thandizo mbale). 2, FGB fiberglass kuchipala. 3, AS unilateral mpweya CHIKWANGWANI kuchipala chingamu.

Pali zitsanzo zingapo za gawo mphira ya SPS squeegee?

Pali panopa zitsanzo ziwiri, ndiye M-mtundu mphira ntchito M-mtundu ndi FGB fiberglass mapanelo, ndi ena ndi KUPHATIKIZAPO mphira ntchito AS-mpweya CHIKWANGWANI (conductive, zambiri zosungunulira zosagwira, ndi zambiri wear- kugonjetsedwa).

ndi kukula specifications wa M mtundu kuchipala zomatira chiyani?

M zitsanzo ndi 9 * 50, 9 * 30, 7 * 40, 5 25, 5 * 20 nsonga makulidwe malinga ndi makulidwe, ndipo akhoza makonda mogwirizana ndi zofuna za makasitomala.

ndi miyeso ya FGB fiberglass scraper chiyani?

Miyambo makampani chophimba yosindikiza FGB fiberglass kuchipala specifications 9 * 50, kutalika kwa kudula malingana ndi zofuna za makasitomala. Akhoza makonda mogwirizana ndi zofuna za makasitomala.

ndi miyeso ya AS mpweya CHIKWANGWANI squeegee chiyani?

Miyambo chophimba makampani yosindikiza AS mpweya CHIKWANGWANI kuchipala specifications 7 * 50, kutalika malingana ndi zofuna za makasitomala. Akhoza makonda mogwirizana ndi zofuna za makasitomala.

ndi file mtundu ndi mwamakonda nthawi wofunikila ntchito mwambo uti?

3D: STP, XT; CAD: 2000 Baibulo, nthawi mwambo: pasanathe masiku 5 ntchito

Is it possible to grind the SPS squeegee?

The mitundu itatu scraper akhoza kuuluka. M lachitsanzo FGB chitsanzo umodzi pazipita akupera kuchuluka 0.5mm (200 mauna akupera gudumu). AS mpweya CHIKWANGWANI kuchipala umodzi pazipita umapezeka kuchuluka 0.1mm (200 mauna akupera gudumu, mpweya CHIKWANGWANI gulu akhoza kukhala pansi). The squeegee kuti wasankhidwa ntchito mpaka muli zambiri mkati zosungunulira. Kuuma kwa mpeni m'mphepete zachepa kwambiri kuti kuuluka yomweyo. Pamafunika maola 24 okha pamaso akupera.

Kodi kukhazikitsa FGB fiberglass scraper ndi AS mpweya CHIKWANGWANI scraper mu mindandanda yamasewera ochiritsira?

Onse FGB fiberglass scraper ndi AS mpweya CHIKWANGWANI scraper ndi 1.2mm wandiweyani. Iwo akhoza kuikidwa ndi 8mm PAD wandiweyani, amene tikhoza kupereka.

Chisamaliro cha SPS Squeegee?

The squeegee is printed for a long time, and the solvent easily erodes the squeegee blade. The hardness and wear resistance of the squeegee are reduced. Therefore, after the squeegee has been printed for a long time, it needs to be cleaned, and after being left for 12-24 hours, it is used or ground again. If stored in a low-temperature environment, soak it in 30°C warm water for 10 minutes before use. Dry it with a cloth and use it. When the squeegee is left for a long time, it is forbidden to touch the other side of the squeegee to prevent the squeegee from deforming.