Support plate screen printing squeegee fixture

Short Description:

Product Detail

Product Tags

Product Details

1.SPS-SX support plate squeegee fixture advantage

Traditional silk screen scraping fixtures are clamped with pure rubber

squeegee,Use an Allen key to tighten the screws.During the locking process,

the squeegee will be crushed and deformed, causing the squeegee

blade to form a snake shape and printing.The film thickness is not uniform.

SPS-Support plate screen printing squeegee clamp1

SPS-SX support plate squeegee fixture advantage

No need to remove the fixture from the device

Fast locking handle, no need for auxiliary tools to lock the squeegee

Insert the fiberglass plate part of the squeegee directly into the

fixture, clamp, and the blade edge is not affected.

Replace the squeegee fast, and does not replace the squeegee produced

screen blocking

SPS-Support plate screen printing squeegee clamp4

2.Specifications and materials

Aluminum alloy profile, oxidation treatment

The width of the square tube connecting the SPS-SX scraper

fixture of the printing equipment should be less than 26mm

The thickness of the fiberglass board of the glass fiber board

squeegee is 1.3~1.6mm

SPS-SX fixture is currently producing a longest length of 500mm

SPS-Support plate screen printing squeegee clamp6

Industry Application




Company Profile

Plet company is located in Changzhou, China, which is very close to Shanghai. He once sold screen printing inks and served in many electronic industries. He has extensive screen printing experience and realized the importance of squeegee in the screen printing process. In 2013, Plet began to engage in the research and production of support plate squeegee, and established the SPS brand squeegee, which provides stable printing angle and printing pressure for many precision screen printing customers in China.


Why choose us?


Our Service


Customer Praise

A. Photovoltaic Company Production Manager India:We are a company that prints battery sheet, SPS-AS carbon fiber squeegee printing Battery sheet grid is relatively small, printing life is long, each average reaches 50,000 times.

B. PCB circuit board company Technical staff China: Before we cooperate with SPS Squeegee, when we do the through hole printing process, the silver paste is not easy to penetrate the hole, and the scrap rate is very high. After talking with SPS technology, they recommended the new squeegee, which helped us solve the problem of low yield rate of through-hole printing. Thank you very much.

C. Membrane switch company quality management personnel Vietnam: SPS recommended R angle scraper printing transparent color effect is excellent, no squeegee marks, the surface looks very smooth, we will also apply R angle squeegee  to the window printing liquid printing process, hope to reduce the rate of defective rate.

 D. Technical Director of Chip Manufacturing Company Taiwan: We print insulating ink on special film, and 160 products are printed on A4 size film. This has high consistency on film thickness. The film thickness made by traditional squeegee,the film thickness in the middle and the film thickness of the edge product differ by 3 microns, and the carbon fiber squeegee using SPS solves this problem, and the film thickness of the entire printing surface is controlled by 13±1 μm.

  • Previous:
  • Next:

  • Write your message here and send it to us

    Products categories